Tailgate Spreaders

Tailgate Spreaders

See How the Meyer Blaster™ 750R Stacks Up

When you need to get as tough on winter as it’s getting on you, the Meyer Blaster 750R is the tailgate spreader for you. Durable? You bet. Built with the most powerful spreader motor available, the Blaster has the power you need, while the material management system lets you spread what you want, where you want. The Blaster is compatible with 1/2-ton and larger trucks, and tractors with a three-point hitch. See Meyer’s competitive features and how they compare to brands like SnowEx and Buyers.

Warranty - 5 Years

Warranty - 5 Years

Meyer offers America's best warranty on Blaster tailgate spreader systems.

Meyer is so confident of the quality built into every Blaster spreader, we back them with the America's best warranty. Most competitors offer a 1-year warranty, while Blasters are backed with five years of standard protection.

5 Year Warrenty

  • 1075 Warranty is 2 years

    1075 Warranty is 2 years

  • TGS06 Warranty is 1 year

    TGS06 Warranty is 1 year

Auto Stop

Auto Stop

The Blaster 750R controller allows you to stop the spinner from spinning when the vehicle brakes are applied.

How many times have you been at an intersection and left a pile of material in the middle of the road? Meyer's "Auto-Stop" feature prohibits this from happening and keeps you profitable.

  • 1075 has no Auto Stop feature

    1075 has no Auto Stop feature

  • TGS06 has no Auto Stop feature

    TGS06 has no Auto Stop feature

Auger Extensions - Available

Auger Extensions - Available

Meyer has five auger options available so you can match the auger to the material you are spreading.

By using one of five auger configurations, only Meyer Blasters have the ability to spread any of the following dry free-flowing materials: rock salt, calcium chloride, ice melt, fine salt, fine gravel and salt mixes.

  • 1075 Auger Extensions are not available

    1075 Auger Extensions are not available

  • TGS06 Auger Extensions not available

    TGS06 Auger Extensions not available

Capacity - 12 Cu. Ft.

Capacity - 12 Cu. Ft.

Meyer Blaster 750 holds 29% more material than SnowEx 1075*.

A large capacity hopper reduces the need for constant refilling making it easier to move onto the next job.

* Independent third party study that measured total volume in cubic feet

  • 1075 Capacity is 9.9 Cu. Ft.

    1075 Capacity is 9.9 Cu. Ft.

  • TGS06 Capacity Information Not Available

    TGS06 Capacity Information Not Available

Mounting - Class 3

Mounting - Class 3

Meyer Blasters use a Class 3, 2″ receiver mount, a common and easy-to-install attachment device.

A Class 3, 2″ receiver hitch mount allows you to easily install/remove the Blaster spreader.

  • 1075 Mounting varies

    1075 Mounting varies

  • TGS06 Mounting is class 4

    TGS06 Mounting is class 4

Motor - 15. ft. lbs. Stall Torque

Motor - 15. ft. lbs. Stall Torque

Blaster's motors are the most powerful in the industry and can grind through clumped materials. This makes the spreader more reliable.

The Blaster's unique direct-drive motor is rated at up to 70 amps of surge power to grind through those annoying chunks of salt or sand. And the direct-drive system applies the torque directly to the auger. That's something the competition can't match.

  • 1075 Motor has 1.2 ft. lbs. Stall Torque

    1075 Motor has 1.2 ft. lbs. Stall Torque

  • TGS06 Motor Not Available

    TGS06 Motor Not Available

Vibrate Control

Vibrate Control

Auto-vibrate mode is standard on all Blaster controllers. This helps eliminate tunneling of material during spreading operations.

The Auto-Vibrate Mode automatically vibrates the spreader for ten seconds every sixty (60) seconds to keep your load agitated and ready to spread.

  • 1075 Vibrate Control is Optional

    1075 Vibrate Control is Optional

  • TGS06 has Vibrate Control

    TGS06 has Vibrate Control

Blast Control

Blast Control

The patent-pending illuminated in-cab Blaster controller comes standard with on on-command "Blast" mode.

"Blast" mode provides an extra 70-amp surge to the 1/2HP direct drive motor giving it the power to grind through clumped material. This helps provide an even material flow to the spinner and reduces material waste.

  • 1075 has no Blast Control

    1075 has no Blast Control

  • TGS06 has Blast Control

    TGS06 has Blast Control