Super-V3 LD Accessories

    CUTTING EDGES

    Back to top
    Bottom-Trip Steel Cutting Edge (standard equipment)

    Bottom-Trip Steel Cutting Edge (standard equipment)

    Meyer steel bottom-trip cutting edges are scientifically designed to meet the demands of a tough environment. Our unique, heat-treated specifications are derived from years of testing to provide long-lasting performance. All Meyer Diamond cutting edges are also reversible to extend life. Once a side is worn, simply reverse the cutting edge for extended use. Meyer moldboards and cutting edges are pre-drilled and ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Complete Kits come with all hardware in order to install.
    • 7.5 ft. Steel

      • 7.5 ft. Steel 09112 $295.00
      • Cut Edge Only 09331 $220.00
      • Hardware Only 08222 $81.00
    Bottom-Trip Rubber Cutting Edge Kit

    Bottom-Trip Rubber Cutting Edge Kit

    Today's street and road managers are faced with low-noise requirements and a variety of delicate surfaces. Meyer rubber cutting edges are designed to eliminate noise while providing maximum protection to the surface. Our 1.5-inch-thick edge is formulated for long life. All Meyer rubber cutting edges are also reversible to extend cutting edge life. Once a side is worn, simply reverse it for extended use. Meyer moldboards and cutting edges are pre-drilled and ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Complete Kits come with all hardware in order to install.
    • 7.5 ft. Steel

      • 7.5 ft. Steel 08247 $700.00
      • Hardware Only 08224 $89.00
    Bottom-Trip Polyurethane Cutting Edge Kit

    Bottom-Trip Polyurethane Cutting Edge Kit

    Today’s pros are faced with many requirements and stipulations from their customers. Polyurethane cutting edges provide the rigidity of steel edges, and the noise reduction of rubber edges, all while protecting sensitive surfaces. Our one-inch-thick edge is formulated for long life. Bottom-trip cutting edges are also reversible to extend the life, once a side is worn, simply reverse the cutting edge for extended use. Meyer moldboards and cutting edges are pre-drilled and ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Complete Kits come with all hardware in order to install.
    • 7.5 ft. Steel

      • 7.5 ft. Steel 09333 $610.00
      • Hardware Only 08224 $89.00

    DEFLECTORS

    Back to top
    Meyer Rubber Snow Deflectors

    Meyer Rubber Snow Deflectors

    Made of pliable rubber, deflectors keep snow flume down and away from the windshield and accentuate the snow rolling action. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required.

    Note: Complete Kits come with all hardware in order to install.
     
    • 7.5 ft Steel

      • 7.5 ft Steel 13274 $413.00
      • Bar Strap Only 13277 $78.00
      • Hardware Only 08614 $48.00

    CONTROLLER CRADLE MOUNTS

    Back to top
    Pistol Grip Cradle Mount

    Pistol Grip Cradle Mount

    The Pistol Grip Cradle mount is custom-designed for any Meyer Pistol Grip Controller. The unique design allows the Pistol Grip to snap into place, docking the unit in a safe and useful position. It will mount to the dashboard or with the Floor Mount (sold separately) with convenient mounting screws that come with the Pistol Grip Cradle Mount. Installation is quick and easy. Unit comes with mounting hardware for an easy, do-it-yourself install.
    • Pistol Grip Cradle Mount

      • Pistol Grip Cradle Mount 22798 $61.00
    45-Degree Cradle Adapter

    45-Degree Cradle Adapter

    The 45-Degree Cradle Adapter provides added flexibility and functionality to your mounting placement. The 45-degree angle adapter positions your controller in a more convenient location depending on the mount location you desire. This angle adapter works with both the Pistol Grip and Joystick cradle mounts. The unit mounts to the dashboard with heavy-duty grip tape or screws. Installation is quick and easy. Unit comes with mounting hardware and tape for an easy, do-it-yourself install.
    • 45-Degree Cradle Adapter

      • 45-Degree Cradle Adapter 22815 $56.00
    Floor Mount

    Floor Mount

    The Meyer articulating Floor Mount provides maximum ergonomic flexibility to mount the controller close to the operator. The 10-inch or 20-inch flex-articulating arm moves virtually wherever the operator desires. Works perfectly with all three models: Joystick, Touch Pad and Pistol Grip. The unit mounts conveniently to the floorboard. Unit comes with mounting hardware for an easy, do-it-yourself install.
    • Floor Mount

      • Floor Mount (10") 22801 $87.00
      • Floor Mount (20") 22844 $113.00

    LIGHTS

    Back to top
    Nite Saber® III Lights

    Nite Saber® III Lights

    Use state-of-the art design to maximize visibility and safety.
    Features include:
    • Four-headlamp system for superior forward and a wide curbside beam pattern for safer, easier & more productive plowing
    • Complex reflector headlight system allows more light energy from the headlight bulb to be used to illuminate the road
    • Large access rear door makes bulb replacement easy
    • High output harness system ensures that maximum electrical energy is transmitted to the headlight system
    • Single-bolt, adjustable mounting allows for faster installation and adjusting when necessary. Lights ship as a left and right set including all hardware and instructions for a quick installation.  Part #07787
    Whelen Lights/Alarms

    Whelen Lights/Alarms

    Whelen lights and alarms are available in select styles and can be easily added to new or existing vehicles to increase your safety when plowing in congested or busy areas. 
    • Whelen Lights/Alarms

      • WH 2000 Series 22W 2022LPAM $206.00
      • Super-LED Beacon Class2 Mag Mt L22HAM $277.00

    ACCESSORIES - SHOVELS

    Back to top
    Meyer Contractor Shovel & Pro-series Pushers

    Meyer Contractor Shovel & Pro-series Pushers

    Whether clearing sidewalks, pathways, or digging out your vehicle after a major snowstorm, the American-made 30” or 36” Pro-series Pushers and 26” Meyer Contractor shovel are built to provide the ultimate snow clearing performance you’ve come to expect from the Meyer brand.  Pushers feature 30” or 36” unbreakable poly blade, reinforced shovel head for heavy snow, 42” fiberglass shaft and ribbed D-handle. Contractor shovel features tough 26” poly blade with galvanized steel scraper, 44” steel shaft & ribbed D-handle. Part # 92226: 26" Contractor Shovel (10 pack), Part # 95230: 30" Pro-Pusher (5 pack), Part # 95236: 36" Pro-Pusher (5 pack)
    Meyer Pro Edge Snow Rake

    Meyer Pro Edge Snow Rake

    This Meyer accessory is made from a foam-like polyethylene. The squeegee-like head never gets brittle, and doesn't absorb water, so it remains pliable to safely contour to your vehicle and efficiently remove snow. The pliable head also means no more scratching your vehicle's finish. It comes with a long handle so no matter how large your vehicle, the Meyer Pro Edge Snow Rake can reach the area you need to scrape.
    • Meyer Pro Edge Snow Rake

      • Meyer Pro Edge Snow Rake (10/case) 38198 $354.00
    Meyer Hydraulic Lock

    Meyer Hydraulic Lock

    Prevent your valuable hydraulic unit from theft with our stainless steel Hydraulic Lock. A 3-inch locking pin replaces the existing bolt and works on all Meyer hydraulics. Quick disconnect/connect design makes changes fast and easy. Lock comes with a set of keys (2) complete with instructions for quick and easy installation. 
    Part #07695
    Snow Shoes Super-V LD

    Snow Shoes Super-V LD

    Meyer Super-V LD Snow Shoes are designed to set the scrapping height of the cutting edge. It is common for the edge to run 0.5-inch to 1-inch higher than the surface when plowing gravel driveways/lots or other ground-sensitive surfaces. The Super-V LD shoe is a heavy-duty steel cast for maximum longevity and durability. The mushroom design will rotate 360 degrees eliminating hang-ups or catching of unwanted objects. In addition, the mushroom design is convenient for back-dragging applications. Fits all Super-V LD moldboards. Shoes come as a set (2) or are sold individually, and include all mounting hardware for easy installation.
    • Snow Shoes Set of 2

      • Set of 2 09214 $430.00
    Plow Markers

    Plow Markers

    Meyer’s heavy-duty plow markers allow the operator to see the edge of his plow from the cab providing maximum visibility for increased performance and safety. They are made from solid tubing and are flexible, but durable to withstand the winter environment. Markers are pre-drilled to fit the moldboard, so no drilling is necessary. Markers are shipped two (2) per set and include all mounting hardware and instructions for easy, do-it-yourself installation.  Part #09916
    The Big Yellow Box

    The Big Yellow Box

    The Meyer Big Yellow Box is the perfect companion for your fall, spring, summer and winter needs. The unit features 8 cubic feet of storage and is made of double-walled polymer that is virtually indestructible. Perfect for storing sand/salt, power tools, sports equipment, pool supplies and tools or garbage. Unit will not rust and comes lock-ready (lock is sold separately). Forklift pockets are built in to move the unit when full of material. Unit is 32-inches wide, 23-inches deep and 30-inches tall. No assembly required.
    • The Big Yellow Box

      • The Big Yellow Box 32403 $378.00
    Hotshot Hand-Held Crank Spreader

    Hotshot Hand-Held Crank Spreader

    This professional spreader holds up to 5 pounds of ice-melt products. It's easy to use: Set the dial, pull the trigger then rotate the lever in a clockwise position. To stop material output, simply let go of the trigger. Spreads ice-melt, fertilizer or seed for true four-season performance.
    • Hotshot Hand-Held Crank Spreader

      • Hotshot Hand-Held Crank Spreader (6/case) 38196 $211.00
    Driveway Markers

    Driveway Markers

    Meyer Driveway Markers are 4-feet long, made of sturdy ¼-inch fiberglass to withstand winter elements. They are flexible, designed to bend virtually in half and return to their original position. Designed of highly reflective florescent orange along with a specialized reflective tape make them highly visible during a storm or after dark. 100 bundle Part #03240, Display Stand Part # 03243.
    Plow Cart

    Plow Cart

    Moving and/or maneuvering a fully assembled plow can be a difficult task! However, with the Meyer EZ-Cart; moving a plow is EASY. Plow carts are highly mobile custom cradles that allow anyone to move an unattached plow quickly and easily. Now, move your plow around as easily as your gas grill with the Meyer Plow cart. Choose the correct cart for your specific plow. Plow carts come as one (1) unit and come with all hardware and instructions for an easily installation.
    • Plow Cart

      • Super-V QMU-FV $660.00
      • EZ Mount Plus & MDII QMB-JB $510.00

    OIL - PAINT - GREASE

    Back to top
    Meyer Sno-Flo Industrial Paint

    Meyer Sno-Flo Industrial Paint

    Our specially formulated paint is designed to improve snow-rolling action and withstand the harsh operational environment. Meyer Yellow, Black & White Primer is available in aerosol spray cans (12 per case) and Meyer Yellow Brush Paint is available in 1-quart cans (4 per case) that can be shipped via UPS.
    • Industrial paint

      • Brush Yellow (4/1 qt cans/case) 08755 $215.00
      • Spray Yellow (12 cans/case) 08677 $194.00
    Meyer M1 Hydraulic Fluid

    Meyer M1 Hydraulic Fluid

    Keep your hydraulic unit operation at factory performance by using OEM M1 Hydraulic Fluid. Meyer M1 Hydraulic fluid is scientifically formulated to synchronize with internal components to withstand the extreme temperatures of the summer and winter. Meyer’s exclusive additives maximize performance and longevity of the complete operating system. M1 Hydraulic Fluid is guaranteed to perform at temperatures -40 degrees and higher. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall. 

    Note: using other hydraulic fluids or additives voids your warranty and may permanently damage your unit. Comes in case/box of 12 and includes easy pour spout or by the bottle. 
    • Hydraulic Fluid

      • Hydraulic Fluid (12 bottle/case) 15487 $182.00
    Meyer M2 Hydraulic Flush

    Meyer M2 Hydraulic Flush

    Keeping your hydraulic unit internally clean is as important as keeping your engine clean. Meyer’s M2 Hydraulic Flush is designed to scrub the internal components and flush away all impurities that may have developed in the system. Our exclusively designed M2 Flush is designed to perform without harming seals, connectors or hydraulic ports. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall. Comes in four quantities and includes an easy-pour spout. Learn more
    Meyer Dielectric Grease

    Meyer Dielectric Grease

    Prevent your valuable system from the harsh elements of the winter with Meyer’s dielectric grease. Meyer’s dielectric grease is specially formulated to coat and protect electrical connections from deteriorating elements such as salt and road grime. It is recommended to coat all electrical connections prior to winter and each time you re-connect to ensure optimal performance. Grease comes per each, 2.7-ounce tube.
    • Meyer Dielectric Grease

      • Dielectric Grease 15632 $11.00
    Meyer Coolube

    Meyer Coolube

    Maintain Meyer equipment with our premium quality, multipurpose, non-soap-based grease. Meyer Coolube is specifically formulated to provide better lubrication in harsh conditions, perfect for higher speeds and lower temperatures. It holds up over a wider temperature range (-40 degrees to 440 degrees Fahrenheit) plus it works wet or dry. Available in 14-ounce tubes or 11-ounce aerosol cans.
    • Meyer Coolube

      • Coolube Tube (10 tubes/case) 15182 $220.00
      • Aerosol (12 cans/case) 15186 $289.00
    Meyer Chain & Cable Lube

    Meyer Chain & Cable Lube

    Maintain your Meyer equipment with our aerosol Chain & Cable lube. It is specially formulated to lubricate, preserve and protect chains and cables. This transparent heavy-duty, dry-film lubricant is formulated with the latest synthetic additives to ensure maximum penetration and protection against corrosion. Once applied, the solvent evaporates, leaving behind a film that will not attract dust or wash off. Available in 11-ounce aerosol cans. Case of 12 Part #15186