Path Pro 2 Accessories

The Path Pro 2 cutting edge is manufactured with steel to meet the demands of a tough environment. Replacement cutting edges are sold as complete kits including attaching hardware and edge. For use on Path Pro 2 models 23175 & 23275. Part #08392 (2,03m) 

Wireless Control Kit contains a Meyer wireless receiver and key fob. The kit allows for easy and seamless installation with minimal under hood wires and NO through dash connections. The key fob allows for remote up & down movement of the plow. It easily hangs from your keychain or slips into your pocket. Works with Path Pro 2 model 23275. Part #22893 

Key Fob allows for remote up & down movement of the plow when used with the Meyer receiver part #22894. It easily hangs from your keychain or slips into your pocket. Works with Path Pro 2 model 23275. Part #22891

Wireless Receiver allows for remote up & down movement of the plow when used with the Meyer key fob part #22891. Works with Path Pro 2 model 23275. Part #22894

The battery replacement kit comes with two batteries and the installation instructions to replace the batteries for Path Pro 2 model 23275.  To extend battery life, it is recommended that the remote be kept in a warm environment when not in use. As with all batteries, it is also recommended to replace them one a year to ensure consistent performance. Part #22988

Allows you to set the scrapping height of the cutting edge. Perfect for plowing gravel driveways/lots or other ground sensitive surfaces. Bolt-on shoe for easy installation. Rotates 360 degrees to eliminate hang-ups or catching of unwanted objects. Includes all mounting hardware for easy installation. Part #08383 (2 per set)

The power cord battery extension is designed to extend the battery power cord by 1,8m. The kit comes complete with the hardware to connect and extend the positive and negative wires to reach vehicle batteries that are mounted under the driver seat or in the rear of the vehicle. Part #22863

Path Pro 2 replacement markers allow the operator to see the edge of his plow from the cab providing maximum visibility for increased performance and safety. They are made from solid tubing and are flexible, but durable to withstand the winter environment. Markers are pre-drilled to fit the moldboard, no drilling is necessary. Markers are shipped two (2) per set and includes all mounting hardware and instructions for easy do-it-yourself installation. Part #08852 

Driveway Markers are 1,22m long, made of sturdy fiberglass to withstand winter elements. They are flexible, designed to bend virtually in half and return to their original position. Designed of highly reflective florescent orange along with a specialized reflective tape make them highly visible during a storm or after. Part #03240 Bundle of 100, Part #03242 Insertion Tool

Prevent your valuable plow from theft with our Stainless Steel Quick Link Lock. A locking pin replaces existing pin or bolt, works on all Class 3, 5cm receiver hitches. Quick disconnect/connect design makes changes fast and easy. Lock comes with a set of keys (2) complete with instructions for quick & easy installation. Part #07695C

A 5cm front receiver hitch is necessary to mount the Path Pro 2 to a vehicle. If the vehicle hitch is too far under the vehicle, it may not allow the Path Pro 2's lift frame to attach to the hitch, then a 5cm receiver hitch 0.1778m extension will be needed. Part # FHK45793

If the vehicle is too high or too low, the Path Pro 2 drop extension hitch is needed. Part # FHK45058

If the vehicle is too high or too low, the Path Pro 2 drop extension hitch is needed. Part # FHK45054 

Our specially formulated paint is designed to improve snow-rolling action and withstand the harsh operational environment. Yellow, Black & White Primer is available in aerosol spray cans (12/case) and Yellow is available in one 0.94l cans (12 case) and a convenient 4 pack case. Part #08755

Prevent your valuable system from the harsh elements of the winter with Meyer's dielectric grease. Meyer's dielectric grease is specially formulated to coat and protect electrical connections from deteriorating elements such as salt and road grime. It is recommended to coat all electrical connections prior to winter and each time you re-connect to ensure optimal performance. Grease comes per each, 80ml tube. Part #15632

Maintain equipment with our premium quality, multipurpose, non-soap based grease. Cool Lube is specifically formulated to provide better lubrication in harsh conditions, perfect for higher speeds and lower temperatures It holds up over a wider temperature range  plus it works wet or dry. Available in 414ml tubes or 325ml aerosol cans.