Drive Pro Support

    • Parts & Tech Documents

      Need to find a part number, service technical document or installation instruction? Look here.

    • Owner’s Manuals

      Get friendly with this owner’s manual to use your Utility Vehicle Plow to its full potential.

    • Receiver Hitch Drive Pro

      Video of the Meyer Drive Pro 2" receiver plow in action on a Kubota utility vehicle.

    • Dealer Locator

      Find your nearest Meyer dealer.

    • Configure Your Plow

      Find the right Meyer snow plow for your vehicle

    • EZ-Identifier

      Have no idea what your Meyer plow part number is? You’re in the right area.

    • FAQs

      Check out the most frequently asked questions regarding Meyer equipment.

    • Full Line Plow & Spreader Brochure

      Meyer offers the largest line of commercial plows in the industry, from small straight blades for tight areas to large plows for municipal applications.

Specifications

Get to know the New Drive Pro plow.
  • Part #: 09472 Blade Type: Steel Full Trip Moldboard Length: 5' 152 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 8 Plow Trip Springs: 2 Cutting Edge: 1/4" x 6" 0,64 cm X 15,24 cm
    Avg Width at Full Angle: 54-1/2" 138 cm Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 325 lbs 147 kg
  • Part #: 28200 Blade Type: Steel Full Trip Moldboard Length: 5' 152 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: Weight Complete: 620 lbs 281 kg
  • Part #: 09473 Blade Type: Steel Full Trip Moldboard Length: 6' 183 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 8 Plow Trip Springs: 2 Cutting Edge: 1/4" x 6" 0,64 cm X 15,24 cm
    Avg Width at Full Angle: 65" 165 cm Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 340 lbs 154 kg
  • Part #: 28210 Blade Type: Steel Full Trip Moldboard Length: 6' 183 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: Weight Complete: 335 lbs 152 kg
  • Part #: 09499 Blade Type: Steel Full Trip Moldboard Length: 6' 8" 203 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: 72" 183 cm Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 370 lbs 168 kg
  • Part #: 28220 Blade Type: Steel Full Trip Moldboard Length: 6' 8" 203 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: Weight Complete: 360 lbs 163 kg
  • Part #: 09498 Blade Type: Steel Full Trip Moldboard Length: 7' 6" 229 cm Moldboard Height: 26" 66 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 8 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: 81" 206 cm Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 400 lbs 181 kg
  • Part #: 28260 Blade Type: Steel Full Trip Moldboard Length: 7' 6" 229 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: Weight Complete: 375 lbs 170 kg
  • Part #: 09507 Blade Type: Steel Full Trip Moldboard Length: 7' 6" 229 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 380 lbs 172 kg