Drive Pro Support

    • Parts & Tech Documents

      Need to find a part number, service technical document or installation instruction? Look here.

    • Owner’s Manuals

      Get friendly with this owner’s manual to use your Utility Vehicle Plow to its full potential.

    • Receiver Hitch Drive Pro

      Video of the Meyer Drive Pro 2" receiver plow in action on a Kubota utility vehicle.

    • Dealer Locator

      Find your nearest Meyer dealer.

    • Configure Your Plow

      Find the right Meyer snow plow for your vehicle

    • EZ-Identifier

      Have no idea what your Meyer plow part number is? You’re in the right area.

    • FAQs

      Check out the most frequently asked questions regarding Meyer equipment.

Specifications

Get to know the New Drive Pro plow.
  • Part #: 09472 Blade Type: Steel Full Trip Moldboard Length: 5' 152 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 8 Plow Trip Springs: 2 Cutting Edge: 1/4" x 6" 0,64 cm X 15,24 cm
    Avg Width at Full Angle: 54-1/2" 138 cm Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 325 lbs 147 kg
  • Part #: 28200 Blade Type: Steel Full Trip Moldboard Length: 5' 152 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: Weight Complete: 620 lbs 281 kg
  • Part #: 09473 Blade Type: Steel Full Trip Moldboard Length: 6' 183 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 8 Plow Trip Springs: 2 Cutting Edge: 1/4" x 6" 0,64 cm X 15,24 cm
    Avg Width at Full Angle: 65" 165 cm Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 340 lbs 154 kg
  • Part #: 28210 Blade Type: Steel Full Trip Moldboard Length: 6' 183 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: Weight Complete: 335 lbs 152 kg
  • Part #: 09499 Blade Type: Steel Full Trip Moldboard Length: 6' 8" 203 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: 72" 183 cm Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 370 lbs 168 kg
  • Part #: 28220 Blade Type: Steel Full Trip Moldboard Length: 6' 8" 203 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: Weight Complete: 360 lbs 163 kg
  • Part #: 09498 Blade Type: Steel Full Trip Moldboard Length: 7' 6" 229 cm Moldboard Height: 26" 66 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 8 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: 81" 206 cm Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 400 lbs 181 kg
  • Part #: 28260 Blade Type: Steel Full Trip Moldboard Length: 7' 6" 229 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: Weight Complete: 375 lbs 170 kg
  • Part #: 09507 Blade Type: Steel Full Trip Moldboard Length: 7' 6" 229 cm Moldboard Height: 22-1/2" 57 cm
    Moldboard Gauge: 14 ga 1,9 mm Vertical Ribs: 6 Plow Trip Springs: 2 Cutting Edge: 3/8" x 6" 0,95 cm X 15,24 cm
    Avg Width at Full Angle: Angling Rams: 1-1/2" x 10" 3,81 cm x 25,40 cm Weight Complete: 380 lbs 172 kg