Base Line-240/400/750 Spreader Accessories

    ACCESSORIES

    Back to top
    Patented No-Leak Auger Kit (Coarse Material)

    Patented No-Leak Auger Kit (Coarse Material)

    This brush auger kit prevents coarse material like free-flowing #2 rock salt from leaking through the throat of the spreader. It also provides a uniform salt distribution pattern. This comes standard in BL-240 and BL-400 spreaders, but can be purchased as replacement parts.
    • Coarse Material Brush Auger Kit

      • Coarse Material Brush Auger Kit 34300 Buy Now
    Patented No-Leak Auger Kit (Fine Material)

    Patented No-Leak Auger Kit (Fine Material)

    This brush auger kit prevents fine free-flowing material like fine salt from leaking through the throat of the spreader. It also provides a uniform salt distribution pattern. This kit is interchangeable with the coarse auger kit. It is easy to switch to if you need to change salt mixtures. 
    • Fine Material Brush Auger Kit

      • Fine Material Brush Auger Kit 34301 Buy Now
    Steel Auger

    Steel Auger

    This auger is an accessory for the Blaster and BL series spreaders.  This auger is used to draw coarse material into the throat of the hopper.  
    • Steel Auger

    Spinner Plate

    Spinner Plate

    The spinner plate, available for the Blaster and BL-series spreaders, is used to distribute dry, free-flowing ice melt material evenly onto snow and ice covered surfaces.
    • Spinner Plate

    Receiver Hitch Spreader Lock

    Receiver Hitch Spreader Lock

    Prevent your valuable spreader investment from theft with our stainless steel lock. The 3-inch locking pin conveniently replaces the existing pin bolt and works on all standard 2-by-2-inch receiver hitch spreader mounts. The quick disconnect/connect design makes changes fast and easy. Lock comes with a set of keys (2) complete with instructions for quick and easy installation. Protect your investment today.
    • Receiver Hitch Spreader Lock

      • Receiver Hitch Spreader Lock 07695C Buy Now
    Flow Gate Control

    Flow Gate Control

    The Meyer Flow Gate Control System allows the end user to set the material flow rate based on the material being used. The unit is made of 100% aluminum and will not rust, is lightweight and extremely easy to install. The unit clamps to the throat of the spreader. Simply clamp the flow gate unit onto the discharge throat of the unit and tighten the clamping screws. This will allow the flow gate teeth to bite into the discharge throat, securing the control to the spreader. Meyer recognizes that salt is very expensive. That’s why the flow gate control maximizes material discharge to eliminate salt and material waste.

    Click to see flow gate in action
    • Flow Gate Control

    Spreader Controller (optional)

    Spreader Controller (optional)

    The Meyer Spreader Controller (patent-pending) is the most reliable and convenient controller on the market. This lightweight and compact unit comes standard with many easy-to-use, performance-enhancing features such as:
    • Auto Spinner Stop Mode - If selected, when the brake is depressed for five seconds, the spinner automatically stops, thus saving your precious salt.
    • Auto Vibrate Mode - If selected, the vibrator will automatically activate for 10 seconds every 60 seconds; this keeps the material agitated and ready for application.
    The unit also boasts convenient features such as backlit controls for visual clarity at night, and a variable-speed dial that easily controls spinner speed. When it comes to serviceability, this controller is two steps ahead of the competition. The controller also monitors the motor performance. If the controller senses that the motor is not operating, it automatically shuts down the system, which allows the operator to inspect the system. In anticipation of unwanted amp surges, the unit comes standard with easy-to-replace automotive-type fuses. The Meyer Controller requires minimal installation and comes with all mounting hardware and instructions for easy installation.
    • Spreader Controller

      • Spreader Controller 22800 Buy Now
    Meyer Pro Edge Snow Rake

    Meyer Pro Edge Snow Rake

    This Meyer accessory is made from a foam-like polyethylene. The squeegee-like head never gets brittle, and doesn't absorb water, so it remains pliable to safely contour to your vehicle and efficiently remove snow. The pliable head also means no more scratching your vehicle's finish. It comes with a long handle so no matter how large your vehicle, the Meyer Pro Edge Snow Rake can reach the area you need to scrape.
    • Meyer Pro Edge Snow Rake

      • Meyer Pro Edge Snow Rake (10/case) 38198 Buy Now
    Hotshot Hand-Held Crank Spreader

    Hotshot Hand-Held Crank Spreader

    This professional spreader holds up to 5 pounds of ice-melt products. It's easy to use: Set the dial, pull the trigger then rotate the lever in a clockwise position. To stop material output, simply let go of the trigger. Spreads ice-melt, fertilizer or seed for true four-season performance.
    • Hotshot Hand-Held Crank Spreader

      • Hotshot Hand-Held Crank Spreader 38195 Buy Now
      • Hotshot Hand-Held Crank Spreader (6/case) 38196 Buy Now
    Driveway Markers

    Driveway Markers

    Meyer Driveway Markers are 4-feet long, made of sturdy ¼-inch fiberglass to withstand winter elements. They are flexible, designed to bend virtually in half and return to their original position. Designed of highly reflective florescent orange along with a specialized reflective tape make them highly visible during a storm or after dark.
    • Driveway Markers

    3-Point Hitch 2-Inch Receiver Spreader Mount

    3-Point Hitch 2-Inch Receiver Spreader Mount

    It is common for the BL-240/400 to be used in many applications. The optional 3-Point Hitch attachment adapts the Meyer BL-240 or BL-400 to any standard 3-point hitch configuration. Perfect for golf courses, universities, institutions and agricultural environments. The spreader inserts into the 2-inch receiver hitch on the 3-Point Hitch mount. It is easily installed and comes with instructions and hardware. 
    • 3-Point Hitch 2" Receiver Spreader Mount

      • 3-Point Hitch 2" Receiver Spreader Mount 36500 Buy Now
    Spreader Rear Work Lights

    Spreader Rear Work Lights

    Lighting the work area behind the truck is becoming as important as lighting the work area in front of the truck. Meyer offers two options for rear lighting, a LED and Halogen offering:
    • LED Rear Light Package – Includes a LED Work Light and mounting hardware. The heavy-duty industrial LED Work Light mounts conveniently to any rear location and brightens up the rear of the truck. The light is fully adjustable and plugs in to a standard trailer hitch power cord.
    • Halogen Rear Light Package – Includes a Halogen Work Light and mounting hardware. The halogen Work Light conveniently mounts to any rear location and brightens up the rear of the truck. The light is fully adjustable and plugs in to a standard trailer hitch power cord.
    Each kit consists of one Work Light and comes fully assembled with mounting hardware and instructions.
    • Spreader Rear Work Lights

      • LED Rear Light Package 34610 Buy Now
      • Halogen Rear Light Package 34609 Buy Now
    Meyer Dielectric Grease

    Meyer Dielectric Grease

    Prevent your valuable system from the harsh elements of the winter with Meyer’s dielectric grease. Meyer’s dielectric grease is specially formulated to coat and protect electrical connections from deteriorating elements such as salt and road grime. It is recommended to coat all electrical connections prior to winter and each time you re-connect to ensure optimal performance. Grease comes per each, 2.7-ounce tube.
    • Meyer Dielectric Grease

    Meyer Sno-Flo Industrial Paint

    Meyer Sno-Flo Industrial Paint

    Our specially formulated paint is designed to improve snow-rolling action and withstand the harsh operational environment. Meyer Yellow, Black & White Primer is available in aerosol spray cans (12 per case) and Meyer Yellow Brush Paint is available in 1-quart cans (4 per case) that can be shipped via UPS.
    • Industrial paint

      • Brush Yellow (4/1 qt cans/case) 08755 Buy Now
      • Spray Yellow 07027 Buy Now
      • Spray Yellow (12 cans/case) 08677 Buy Now
      • Spray Black 07164 Buy Now
      • Spray Black (12 cans/case) 08676 Buy Now
    Meyer Coolube

    Meyer Coolube

    Maintain Meyer equipment with our premium quality, multipurpose, non-soap-based grease. Meyer Coolube is specifically formulated to provide better lubrication in harsh conditions, perfect for higher speeds and lower temperatures. It holds up over a wider temperature range (-40 degrees to 440 degrees Fahrenheit) plus it works wet or dry. Available in 14-ounce tubes or 11-ounce aerosol cans.
    • Meyer Coolube

    Meyer Chain & Cable Lube

    Meyer Chain & Cable Lube

    Maintain your Meyer equipment with our aerosol Chain & Cable lube. It is specially formulated to lubricate, preserve and protect chains and cables. This transparent heavy-duty, dry-film lubricant is formulated with the latest synthetic additives to ensure maximum penetration and protection against corrosion. Once applied, the solvent evaporates, leaving behind a film that will not attract dust or wash off. Available in 11-ounce aerosol cans.
    • Meyer Chain & Cable Lube

      • Chain & Cable Lube (12 cans/case) 15184 Buy Now