Lot Pro Accessories

    CUTTING EDGES and CURB GUARDS

    Back to top
    Full-Trip Steel Cutting Edges (standard equipment)

    Full-Trip Steel Cutting Edges (standard equipment)

    Meyer steel cutting edges are scientifically designed to meet the demands of a tough environment. Our unique, heat-treated specifications are derived from years of testing to provide long-lasting performance. Meyer moldboards and cutting edges are pre-drilled and ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Complete Kits come with all hardware in order to install.
     
    • 7.5 ft. Steel/Poly

      • 7.5 ft. Steel 08296 Buy Now
      • Cut Edge Only 09797
      • Hardware Only 08222
    • 8.0 ft. Steel/Poly/SS

      • 8.0 ft. Steel 08180 Buy Now
      • Cut Edge Only 09133
      • Hardware Only 08222
    • 8.5 ft. Steel/Poly

      • 8.5 ft. Steel 08182 Buy Now
      • Cut Edge Only 09134
      • Hardware Only 08222
    • 9.0 ft. Steel/Poly/SS

      • 9.0 ft. Steel 08185 Buy Now
      • Cut Edge Only 07259
      • Hardware Only 08223
    • 10.0 ft. Steel/Poly

      • 10.0 ft. Steel 08216 Buy Now
      • Cut Edge Only 07235
      • Hardware Only 08223
    Full-Trip Carbide Cutting Edge

    Full-Trip Carbide Cutting Edge

    Heavy-duty, carbide-tip cutting edges significantly extend cutting edge life and deliver superior scraping performance. Once a side is worn, simply reverse the cutting edge for extended life. Meyer moldboards and cutting edges are pre-drilled and ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Carbide cutting edge come in two pieces. The 10-footer comes in two 5-foot sections.  Both sections are included when ordering a "complete kit" or "cutting edge only."
    • 10.0 ft. Steel/Poly

      • 10.0 ft. Steel/Poly 08780 Buy Now
      • Cut Edge Only 07198
      • Hardware Only 08225
    Full-Trip Rubber Cutting Edge Kit

    Full-Trip Rubber Cutting Edge Kit

    Today’s pros are faced with low-noise requirements and a variety of delicate surfaces. Meyer rubber cutting edges are designed to eliminate noise while providing maximum protection to the surface. Our 1.5-inch thick edge is formulated for long life. All Meyer rubber cutting edges are also reversible to extend cutting edge life, once a side is worn, simply reverse it for extended use. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Complete Kits come with all hardware in order to install.
     
    • 7.5 ft. Steel/Poly

      • 7.5 ft. Steel/Poly 08189 Buy Now
      • Cut Edge Only 12436
      • Hardware Only 08224
    • 8.0 ft. Steel/Poly/SS

      • 8.0 ft. Steel/Poly/SS 08190 Buy Now
      • Cut Edge Only 12437
      • Hardware Only 08224
    • 8.5 ft. Steel/Poly

      • 8.5 ft. Steel/Poly 08191 Buy Now
      • Cut Edge Only 12438
      • Hardware Only 08224
    • 9.0 ft. Steel/Poly/SS

      • 9.0 ft. Steel/Poly/SS 08192 Buy Now
      • Cut Edge Only 13076
      • Hardware Only 08225
    • 10.0 ft. Steel/Poly

      • 10.0 ft. Steel/Poly 08193 Buy Now
      • Cut Edge Only 12440
      • Hardware Only 08225
    Full-Trip Polyurethane Cutting Edge Kit

    Full-Trip Polyurethane Cutting Edge Kit

    Today's pros are faced with many requirements and stipulations from their customers. Polyurethane cutting edges provide the rigidity of steel edges and the noise reduction of rubber edges, all while protecting sensitive surfaces. Our one-inch thick edge is formulated for long life. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

    Note: Complete Kits come with all hardware in order to install.
     
    • 7.5 ft. Steel/Poly

      • 7.5 ft. Steel/Poly 08119 Buy Now
      • Cut Edge Only 09224
      • Bar Strap Only 13058
      • Hardware Only 08224
    • 8.0 ft. Steel/Poly/SS

      • 8.0 ft. Steel/Poly/SS 08160 Buy Now
      • Cut Edge Only 09222
      • Bar Strap Only 13060
      • Hardware Only 08224
    • 8.5 ft. Steel/Poly

      • 8.5 ft. Steel/Poly 08162 Buy Now
      • Cut Edge Only 09221
      • Bar Strap Only 13064
      • Hardware Only 08224
    • 9.0 ft. Steel/Poly/SS

      • 9.0 ft. Steel/Poly/SS 08164 Buy Now
      • Cut Edge Only 09206
      • Bar Strap Only 13064
      • Hardware Only 08225
    • 10.0 ft. Steel/Poly

      • 10.0 ft. Steel/Poly 08167 Buy Now
      • Cut Edge Only 09284
      • Bar Strap Only 13066
      • Hardware Only 08225
    Edge Curb Guards

    Edge Curb Guards

    Protect the edge of your Meyer plow from driver abuse and hidden obstructions. Made with 3/8-inch steel, easy to install with pre-drilled hole pattern, curved and contoured for a perfect fit. Comes as a set (2) and are interchangeable/reversible side to side. Ships with mounting hardware and installation instructions for an easy install. 

    DEFLECTORS

    Back to top
    Meyer Heavy-Duty Deflectors

    Meyer Heavy-Duty Deflectors

    Made of rigid polyethylene, Meyer Heavy-Duty Deflectors reduce blow-back on the windshield and accentuates the snow-rolling action. The 45-degree angle end-cut helps throw snow more precisely and quicker for a cleaner scrape. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required. 

    Note: Complete Kits come with all hardware in order to install.
     
    • 7.5 ft. Steel

      • 7.5 ft. Steel 12039 Buy Now
      • Deflector Only 12047
      • Bar Strap Only 12487
      • Hardware Only 08614
    • 8.0 ft. Steel

      • 8.0 ft. Steel 12040 Buy Now
      • Deflector Only 12048
      • Bar Strap Only 12497
      • Hardware Only 08614
    • 8.5 ft. Steel

      • 8.5 ft. Steel 12041 Buy Now
      • Deflector Only 12049
      • Bar Strap Only 12498
      • Hardware Only 08614
    • 9.0 ft. Steel

      • 9.0 ft. Steel 12042 Buy Now
      • Deflector Only 12050
      • Bar Strap Only 12031
      • Hardware Only 08614
    • 10.0 ft. Steel

      • 10.0 ft. Steel 12043 Buy Now
      • Deflector Only 12051
      • Bar Strap Only 12032
      • Hardware Only 08614
    Meyer Rubber Snow Deflectors

    Meyer Rubber Snow Deflectors

    Made of pliable rubber, deflectors keep snow flume down and away from the windshield and accentuate the snow rolling action. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required.

    Note: Complete Kits come with all hardware in order to install.
     
    • 7.5 ft. Steel

      • 7.5 ft. Steel 08109 Buy Now
      • Deflector Only 13050
      • Bar Strap Only 12487
      • Hardware Only 08614
    • 8.0 ft. Steel

      • 8.0 ft. Steel 08111 Buy Now
      • Deflector Only 13051
      • Bar Strap Only 12497
      • Hardware Only 08614
    • 8.5 ft. Steel

      • 8.5 ft. Steel 08112 Buy Now
      • Deflector Only 13052
      • Bar Strap Only 12498
      • Hardware Only 08614
    • 9.0 ft. Steel

      • 9.0 ft. Steel 08113 Buy Now
      • Deflector Only 13053
      • Bar Strap Only 12031
      • Hardware Only 08614
    • 10.0 ft. Steel

      • 10.0 ft. Steel 08114 Buy Now
      • Deflector Only 13054
      • Bar Strap Only 12032
      • Hardware Only 08614
    Meyer Poly Snow Deflectors

    Meyer Poly Snow Deflectors

    Made of pliable poly, these deflectors keep snow flume down and away from the windshield and accentuate the snow-rolling action. Meyer moldboards are pre-drilled and ready for deflector installation. Complete deflector kits come ready-to-install with hardware bag and steel mounting belt. Components are also sold separately as required. 

    Note: Complete Kits come with all hardware in order to install.
     
    • 7.5 ft. Poly

      • 7.5 ft. Poly 12078 Buy Now
      • Deflector Only 12073
      • Bar Strap Only 12487
      • Hardware Only 08614
    • 8.0 ft. Poly/SS

      • 8.0 ft. Poly/SS 12024 Buy Now
      • Deflector Only 12009
      • Bar Strap Only 12497
      • Hardware Only 08614
    • 8.5 ft. Poly

      • 8.5 ft. Poly 12025 Buy Now
      • Deflector Only 12014
      • Bar Strap Only 12498
      • Hardware Only 08614
    • 9.0 ft. Poly/SS

      • 9.0 ft. Poly/SS 12123 Buy Now
      • Deflector Only 12118
      • Bar Strap Only 12031
      • Hardware Only 08614
    • 10.0 ft. Steel/Poly

      • 10.0 ft. Steel/Poly 12124 Buy Now
      • Deflector Only 12119
      • Bar Strap Only 12032
      • Hardware Only 08614

    HAND-HELD CONTROLLERS

    Back to top
    Joystick Controller with Hands-Free Plowing (HFP)

    Joystick Controller with Hands-Free Plowing (HFP)

    Meyer’s Joystick Controller operates with straight blades and V-plows. Controller is illuminated and automatically senses the blade type (V or straight blade) and is also equipped with self-diagnostics. When activated, HFP uses the vehicle's shift lever to control the up/down movement of the blade. Unit comes with instructions and adapter for an easy, do-it-yourself install. The contour shape conveniently fits on the operator's leg when using the leg strap. 

    Note: Scroll down to view Meyer controller mounting accessories.
     
    • Joy Stick

    • Leg Strap

    Pistol Grip Controller with Hands-Free Plowing (HFP)

    Pistol Grip Controller with Hands-Free Plowing (HFP)

    Meyer’s pistol grip controller features HFP to reduce effort and increase performance and safety. When activated, HFP uses the vehicle's shift lever to control the up/down movement of the blade. The pistol grip controller features one-button functionality, illuminated buttons and self-diagnostics. Double-click technology allows the user to press a button twice, and the blade automatically goes left/right or up/down. This controller retrofits back to replace Meyer Touch Pad Controller (22154). Unit comes with instructions and adapter for an easy, do-it-yourself install.  

    Note: Scroll down to view Meyer controller mounting accessories.
    • Pistol Grip

    • Leg Strap

    Pistol Grip Controller with Hands-Free Plowing (HFP)

    Pistol Grip Controller with Hands-Free Plowing (HFP)

    The Pistol Grip controller features HFP to reduce effort and increase performance and safety. When activated, HFP uses the vehicle's shift lever to control the up/down movement of the blade. The pistol grip controller features one-button functionality, illuminated buttons and self-diagnostics. Double-click technology allows the user to press a button twice, and the blade automatically goes left/right or up/down.  Unit comes with instructions and adapter for an easy, do-it-yourself install.

    Note: Scroll down to view Meyer controller mounting accessories.
    • Pistol Grip

    • Leg Strap

    Wireless Controller Kit

    Wireless Controller Kit

    This wireless kit is a direct replacement for all new Meyer wired controllers. It maintains all wired functionality of your Meyer controller.
    • Wireless Controller Kit

      • Wireless Controller Kit 23010
    Touch Pad Controller

    Touch Pad Controller

    Intuitive design with large, illuminated raised rubber indicator arrows for ease of use. Convenient indicator lights make it simple to see the status of the plow. Unit comes with instructions and hardware for an easy, do-it-yourself install. 

    Note: If replacing original touch pad 22125 you need to order a 08644 adapter plug in addition to the 22154.  If replacing original Pistol Grip (22690 or 22690X) with Touch Pad 22154 you need to order a 07691 adapter kit in addition to the 22154.
    • Touch Pad

    • Leg Strap

    CONTROLLER CRADLE MOUNTS

    Back to top
    Joystick Cradle Mount

    Joystick Cradle Mount

    The Joystick Cradle mount is custom-designed for the Meyer Joystick Controller. The unique design allows the joystick to snap into place docking the unit in a safe and useful position. It mounts virtually anywhere on the dashboard or with the Floor Mount (sold separately). Installation is quick and easy. Joystick cradle mount comes with mounting hardware for an easy do-it-yourself install. 
    • Joystick Cradle Mount

      • Joystick Cradle Mount 22799 Buy Now
    Pistol Grip Cradle Mount

    Pistol Grip Cradle Mount

    The Pistol Grip Cradle mount is custom-designed for any Meyer Pistol Grip Controller. The unique design allows the Pistol Grip to snap into place, docking the unit in a safe and useful position. It will mount to the dashboard or with the Floor Mount (sold separately) with convenient mounting screws that come with the Pistol Grip Cradle Mount. Installation is quick and easy. Unit comes with mounting hardware for an easy, do-it-yourself install.
    • Pistol Grip Cradle Mount

      • Pistol Grip Cradle Mount 22798 Buy Now
    45-Degree Cradle Adapter

    45-Degree Cradle Adapter

    The 45-Degree Cradle Adapter provides added flexibility and functionality to your mounting placement. The 45-degree angle adapter positions your controller in a more convenient location depending on the mount location you desire. This angle adapter works with both the Pistol Grip and Joystick cradle mounts. The unit mounts to the dashboard with heavy-duty grip tape or screws. Installation is quick and easy. Unit comes with mounting hardware and tape for an easy, do-it-yourself install.
    • 45-Degree Cradle Adapter

      • 45-Degree Cradle Adapter 22815 Buy Now
    Floor Mount

    Floor Mount

    The Meyer articulating Floor Mount provides maximum ergonomic flexibility to mount the controller close to the operator. The 10-inch or 20-inch flex-articulating arm moves virtually wherever the operator desires. Works perfectly with all three models: Joystick, Touch Pad and Pistol Grip. The unit mounts conveniently to the floorboard. Unit comes with mounting hardware for an easy, do-it-yourself install.
    • Floor Mount

    PLOW WINGS

    Back to top
    Multi-Position Wings –Meyer EZ-Wing™

    Multi-Position Wings –Meyer EZ-Wing™

    Multi-position, all-steel wings greatly improve the performance and efficiency of your Lot Pro moldboard. Each wing can be positioned independently to create a box, scoop or straight-blade configuration (up to nine positions) with the pull of one pin. EZ-Wing MPs add nearly 2.5 feet of overall length to Lot Pro moldboards. Fits all DE2, Lot Pro and AG moldboards 7.5-feet through 10-feet. Installs with no moldboard modification and assembles with pins for quick removal or bolts for long-term use. Comes as a set (2) left and right. Hardware and mounting instructions included.
    • 9-Position Spring Loaded Wing For Lot Pro Stainless Steel/Poly

      • 9-Position Spring Loaded Wing For Lot Pro Stainless Steel/Poly 08380 Buy Now
    Fixed-Position 45-Degree Wings

    Fixed-Position 45-Degree Wings

    Meyer one-position steel wings extend the moldboard 10-inches on each side. Now you can move more snow quicker and faster than ever before. Fits all DE2, Lot Pro and AG moldboards 7.5-feet through 10-feet. Installs with no moldboard modification and assembles with pins for quick removal or bolts for long-term use. Comes as a set (2) left and right. Hardware and mounting instructions included.
    • Fixed-Position Wings for Lot Pro Steel/Stainless Steel/Poly

      • Fixed-Position Wings for Lot Pro Steel/Stainless Steel/Poly 08375 Buy Now
    Box Wings

    Box Wings

    Designed to convert all steel and poly Lot Pro and AG moldboards into a push plow. Features reinforced design with heavy-duty rubber cutting edge. Installs with no moldboard modification and assembles with pins for quick removal or bolts for long-term use. Fits all DE2, Lot Pro Steel & Poly. Comes as a set (2) left and right. Hardware and mounting instructions included.
    • Box Wings

    LIGHTS

    Back to top
    Nite Saber® II Lights

    Nite Saber® II Lights

    Use state-of-the art design to maximize visibility and safety.
    Features include:
    • Four-headlamp system for superior forward and a wide curbside beam pattern for safer, easier & more productive plowing
    • Complex reflector headlight system allows more light energy from the headlight bulb to be used to illuminate the road
    • Large access rear door makes bulb replacement easy
    • High output harness system ensures that maximum electrical energy is transmitted to the headlight system
    • Single-bolt, adjustable mounting allows for faster installation and adjusting when necessary. Lights ship as a left and right set including all hardware and instructions for a quick installation
    • Lights & Modules

    Whelen Lights/Alarms

    Whelen Lights/Alarms

    Whelen lights and alarms are available in select styles and can be easily added to new or existing vehicles to increase your safety when plowing in congested or busy areas. 
    • Whelen Lights/Alarms

      • WH 2000 Series 22W 2022LPAM Buy Now
      • WH Guardian Rot Strobe 55W G2MA Buy Now
      • WH Guardian Strobe Litebar 40W G7MA Buy Now
      • Super-LED Beacon Class1 Mag Mt L21HAM Buy Now
      • Super-LED Beacon Class2 Mag Mt L22HAM Buy Now
      • Respder LED Miniltbar, Amb R1LPVA Buy Now
      • WH Hide Away Kit 4 Amber 50W S450AAAA Buy Now
      • WH Hide Away Kit 4 Clear 50W S650CCCC Buy Now
      • WH 97DB Bckup Alarm 12-24VDC WBUA97 Buy Now

    ACCESSORIES

    Back to top
    Trip-Dampening Kit

    Trip-Dampening Kit

    The Meyer Trip-Dampening System is designed to help cushion the impact of the moldboard's tripping action, both the forward and return actions. It is not intended to eliminate or diminish the tripping action, which is an integral feature of a full-trip moldboard. Rather, the system reduces the impact of the tripping-action, saving wear and tear on the operator and the vehicle. The Trip-Dampening System is easy to install and comes with hardware and installation instructions.

    Note: Complete Kit includes a left side and right side shock kit.  All kits come with all hardware in order to install.
    • 7.5 ft. Steel/Poly

      • 7.5 ft. Steel/Poly 08243 Buy Now
      • Left Side Only 08251
      • Right Side Only 08252
    • 8.0 ft. Steel/Poly/SS

      • 8.0 ft. Steel/Poly/SS 08243 Buy Now
      • Left Side Only 08251
      • Right Side Only 08252
    • 8.5 ft. Steel/Poly

      • 8.5 ft. Steel/Poly 08243 Buy Now
      • Left Side Only 08251
      • Right Side Only 08252
    • 9.0 ft. Steel/Poly/SS

      • 9.0 ft. Steel/Poly/SS 08243 Buy Now
      • Left Side Only 08251
      • Right Side Only 08252
    Central Hydraulic Kit

    Central Hydraulic Kit

    The Meyer industrial-duty Central Hydraulic Kit allows you to plumb the plow directly to the vehicle’s hydraulic system. Central hydraulics provide quick operation, are easy to maintain and install and don’t require the purchase of independent hydraulics. The kit comes complete with two (2) municipal-duty angling rams, a lift ram cylinder (1), complete hardware kit and installation instructions. 
    • Central Hydraulic Kit

      • Central Hydraulic Kit 08895
    Meyer Hydraulic Cover & Locking Strap

    Meyer Hydraulic Cover & Locking Strap

    Protect your valuable Hydraulic unit from the harsh elements with Meyer’s contoured molded cover. Designed for durability and functionality the sub-zero composite fits snugly over the hydraulic unit for maximum protection. All unit maintenance and feature functions can be accessed conveniently while the cover is on. Fits Meyer E-57 and E-58 Series Hydraulic units. Must order Cover (15630) and Locking Strap (15631). 
    • Meyer Hydraulic Cover

    Meyer Hydraulic Lock

    Meyer Hydraulic Lock

    Prevent your valuable hydraulic unit from theft with our stainless steel Hydraulic Lock. A 3-inch locking pin replaces the existing bolt and works on all Meyer hydraulics. Quick disconnect/connect design makes changes fast and easy. Lock comes with a set of keys (2) complete with instructions for quick and easy installation.
    • Meyer Hydraulic Lock

      • Meyer Hydraulic Lock 07695C Buy Now
    Snow Shoes Lot Pro

    Snow Shoes Lot Pro

    Meyer Lot Pro Snow Shoes are designed to set the scrapping height of the cutting edge. It is common for the edge to run ½-inch to 1-inch higher than the surface when plowing gravel driveways/lots or other ground-sensitive surfaces. The Lot Pro shoe is a heavy-duty steel cast for maximum longevity and durability. The mushroom design will rotate 360 degrees eliminating hang-ups or catching of unwanted objects. In addition, the mushroom design is convenient for back-dragging applications. Fits all Lot Pro moldboards. Shoes come per each (1) and include all mounting hardware for easy installation. 
    Plow Markers

    Plow Markers

    Meyer’s heavy-duty plow markers allow the operator to see the edge of his plow from the cab providing maximum visibility for increased performance and safety. They are made from solid tubing and are flexible, but durable to withstand the winter environment. Markers are pre-drilled to fit the moldboard, so no drilling is necessary. Markers are shipped two (2) per set and include all mounting hardware and instructions for easy, do-it-yourself installation.
    • Plow Markers

    Meyer Receiver Hitch Cover

    Meyer Receiver Hitch Cover

    This all-steel, powder-painted hitch cover is a perfect companion to your receiver hitch. Hitch covers keep unwanted debris and elements from corroding the hitch, thus extending the life. The Meyer cover fits in a standard 2-by-2-inch receiver hitch and is easily removable with a convenient locking pin. Unit ships per each.
    • Hitch Cover

    Meyer Winch Cradle

    Meyer Winch Cradle

    For maximum four-season flexibility, Meyer offers a Winch Cradle that conveniently fits to the plow mounting system when the plow is removed. The Winch Cradle fits most Ramsey and Warn winches (under 10,000 pounds) with a 10-by-4.5-inch bolt pattern. Unit comes complete with all mounting hardware and instructions. Easy to assemble and install. (Winch Cradle does not include the winch).
    • Meyer Winch Cradle

    Light Guards – EZ-Mount Xpress

    Light Guards – EZ-Mount Xpress

    “Dressing up” your EZ-Mount Xpress is easy and convenient with our optional Light Guards. Light Guards conveniently bolt on to your EZ-Mount Xpress lift frame. Comes complete as a set (one left and one right) and includes mounting hardware and easy, do-it-yourself installation instructions.
    Brush Guard & Light Guards – EZ-Mount Plus

    Brush Guard & Light Guards – EZ-Mount Plus

    "Dressing up" your EZ-Mount Plus is easy and convenient with our optional Brush Guard and Light Guards. The Brush Guard converts your EZ-Mount Plus into a fully functional Brush Guard when your plow is off the truck. Comes complete as one (1) unit. Light Guards sold separately come as a set (left & right).
    • Brush Guard

    • Light Guards – Fit onto the 08300

    The Big Yellow Box

    The Big Yellow Box

    The Meyer Big Yellow Box is the perfect companion for your fall, spring, summer and winter needs. The unit features 8 cubic feet of storage and is made of double-walled polymer that is virtually indestructible. Perfect for storing sand/salt, power tools, sports equipment, pool supplies and tools or garbage. Unit will not rust and comes lock-ready (lock is sold separately). Forklift pockets are built in to move the unit when full of material. Unit is 32-inches wide, 23-inches deep and 30-inches tall. No assembly required.
    • The Big Yellow Box

    Meyer Pro Edge Snow Rake

    Meyer Pro Edge Snow Rake

    This Meyer accessory is made from a foam-like polyethylene. The squeegee-like head never gets brittle, and doesn't absorb water, so it remains pliable to safely contour to your vehicle and efficiently remove snow. The pliable head also means no more scratching your vehicle's finish. It comes with a long handle so no matter how large your vehicle, the Meyer Pro Edge Snow Rake can reach the area you need to scrape.
    • Meyer Pro Edge Snow Rake

      • Meyer Pro Edge Snow Rake (10/case) 38198 Buy Now
    Hotshot Hand-Held Crank Spreader

    Hotshot Hand-Held Crank Spreader

    This professional spreader holds up to 5 pounds of ice-melt products. It's easy to use: Set the dial, pull the trigger then rotate the lever in a clockwise position. To stop material output, simply let go of the trigger. Spreads ice-melt, fertilizer or seed for true four-season performance.
    • Hotshot Hand-Held Crank Spreader

      • Hotshot Hand-Held Crank Spreader 38195 Buy Now
      • Hotshot Hand-Held Crank Spreader (6/case) 38196 Buy Now
    Driveway Markers

    Driveway Markers

    Meyer Driveway Markers are 4-feet long, made of sturdy ¼-inch fiberglass to withstand winter elements. They are flexible, designed to bend virtually in half and return to their original position. Designed of highly reflective florescent orange along with a specialized reflective tape make them highly visible during a storm or after dark.
    • Driveway Markers

    Suspension Enhancement

    Suspension Enhancement

    To improve the ride and overall performance of your vehicle, Meyer offers Timbren Suspension Enhancement kits. Timbren suspension system works in conjunction with your vehicle’s factory suspension system to provide added support in the front or rear of your vehicle. Timbren’s rubber-cushioned products reduce the harsh ride caused by adding leaf springs or helper springs. Timbren suspension kits come complete as a set (2) and include installation instructions. May require professional installation.
    ShurTrax Ballast Solution

    ShurTrax Ballast Solution

    To improve the ballast of your plow and truck, ShurTrax is the easy, safe way to add up to 400 pounds of traction weight to trucks and SUVs. Just fill the super-tough, woven mesh-reinforced ballast bag with water from your garden hose and you’re ready to go. It’s designed to freeze and has been tested to -40 degree F/C. Unit is designed to lie flat in the bed and is tough enough to support 500 pounds of cargo. Ships per each.
    • ShurTrax Model

      • Compact/SUV truck LW-0048
      • Full size pick-up truck LW-0056
    Plow Cart

    Plow Cart

    Moving and/or maneuvering a fully assembled plow can be a difficult task! However, with the Meyer EZ-Cart; moving a plow is EASY. Plow carts are highly mobile custom cradles that allow anyone to move an unattached plow quickly and easily. Now, move your plow around as easily as your gas grill with the Meyer Plow cart. Choose the correct cart for your specific plow. Plow carts come as one (1) unit and come with all hardware and instructions for an easily installation.
    • Plow Cart

      • Super-V QMU-FV
      • EZ Mount Plus & MDII QMB-JB
      • EZ-Mount Lift Frame QME-SB

    OIL - PAINT - GREASE

    Back to top
    Meyer Sno-Flo Industrial Paint

    Meyer Sno-Flo Industrial Paint

    Our specially formulated paint is designed to improve snow-rolling action and withstand the harsh operational environment. Meyer Yellow, Black & White Primer is available in aerosol spray cans (12 per case) and Meyer Yellow Brush Paint is available in 1-quart cans (4 per case) that can be shipped via UPS.
    • Industrial paint

      • Brush Yellow (4/1 qt cans/case) 08755 Buy Now
      • Spray Yellow 07027 Buy Now
      • Spray Yellow (12 cans/case) 08677 Buy Now
      • Spray Black 07164 Buy Now
      • Spray Black (12 cans/case) 08676 Buy Now
    Meyer M1 Hydraulic Fluid

    Meyer M1 Hydraulic Fluid

    Keep your hydraulic unit operation at factory performance by using OEM M1 Hydraulic Fluid. Meyer M1 Hydraulic fluid is scientifically formulated to synchronize with internal components to withstand the extreme temperatures of the summer and winter. Meyer’s exclusive additives maximize performance and longevity of the complete operating system. M1 Hydraulic Fluid is guaranteed to perform at temperatures -40 degrees and higher. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall. 

    Note: using other hydraulic fluids or additives voids your warranty and may permanently damage your unit. Comes in case/box of 12 and includes easy pour spout or by the bottle. 
    • Hydraulic Fluid

      • Hydraulic Fluid 15134 Buy Now
      • Hydraulic Fluid (12 bottle/case) 15487 Buy Now
      • Hydraulic Fluid (55 gallon drum) 15614
    Meyer M2 Hydraulic Flush

    Meyer M2 Hydraulic Flush

    Keeping your hydraulic unit internally clean is as important as keeping your engine clean. Meyer’s M2 Hydraulic Flush is designed to scrub the internal components and flush away all impurities that may have developed in the system. Our exclusively designed M2 Flush is designed to perform without harming seals, connectors or hydraulic ports. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall. Comes in four quantities and includes an easy-pour spout. Learn more
    • Hydraulic Flush

      • Hydraulic Flush (12 bottles/case) 15902 Buy Now
      • Hydraulic Flush (5 gallon pail) 15903 Buy Now
      • Hydraulic Flush (55 gallon drum) 15904
    Meyer Dielectric Grease

    Meyer Dielectric Grease

    Prevent your valuable system from the harsh elements of the winter with Meyer’s dielectric grease. Meyer’s dielectric grease is specially formulated to coat and protect electrical connections from deteriorating elements such as salt and road grime. It is recommended to coat all electrical connections prior to winter and each time you re-connect to ensure optimal performance. Grease comes per each, 2.7-ounce tube.
    • Meyer Dielectric Grease

    Meyer Coolube

    Meyer Coolube

    Maintain Meyer equipment with our premium quality, multipurpose, non-soap-based grease. Meyer Coolube is specifically formulated to provide better lubrication in harsh conditions, perfect for higher speeds and lower temperatures. It holds up over a wider temperature range (-40 degrees to 440 degrees Fahrenheit) plus it works wet or dry. Available in 14-ounce tubes or 11-ounce aerosol cans.
    • Meyer Coolube

    Meyer Chain & Cable Lube

    Meyer Chain & Cable Lube

    Maintain your Meyer equipment with our aerosol Chain & Cable lube. It is specially formulated to lubricate, preserve and protect chains and cables. This transparent heavy-duty, dry-film lubricant is formulated with the latest synthetic additives to ensure maximum penetration and protection against corrosion. Once applied, the solvent evaporates, leaving behind a film that will not attract dust or wash off. Available in 11-ounce aerosol cans.
    • Meyer Chain & Cable Lube

      • Chain & Cable Lube (12 cans/case) 15184 Buy Now