Unlike most snowplow attachments for utility vehicles, the Drive Pro's moldboard goes up, down, right or left with a remote control and is 100% commercial grade. Drive Pro full-trip moldboards are designed to give way, absorbing the impact caused by snow covered objects like uneven sidewalks, protecting the equipment and ensuring operator safety.

 

The driving force behind every Meyer snowplow is a reliable and responsive hydraulic system. Triple-layered sealed coils and connectors virtually eliminate corrosion and moisture often found in electrical and mechanical systems. And unlike competitive systems, all Meyer hydraulic systems ship standard with custom-molded covers to help protect the units from road salt and grime. 

Meyer is proud to offer the industry’s best warranty coverage on complete plow systems with an online registration:
3 YEARS on all components.*
5 YEARS on all structural steel*

Full-trip Steel Cutting Edges (standard equipment)
Meyer steel cutting edges are scientifically designed to meet the demands of a tough environment. Our unique, heat-treated specifications are derived from years of testing to provide long-lasting performance. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

Plow Size / Type	Complete Kit	Cut Edge Only	Hardware Only
5.0 ft. Steel	08172	07294	08222
6.0 ft. Steel	08175	09271	08222
6.8 ft. Steel	08176	09277	08222

Full-trip Rubber Cutting Edge Kit
Today's pros are faced with low-noise requirements and a variety of delicate surfaces. Meyer rubber cutting edges are designed to eliminate noise while providing maximum protection to the surface. Our 1.5" thick edge is formulated for long life. All Meyer rubber cutting edges are also reversible to extend cutting edge life, once a side is worn, simply reverse it for extended use. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

Plow Size / Type	Complete Kit	Cut Edge Only	Hardware Only
6.0 ft. Steel	08237	13077	08224
6.8 ft. Steel	08236	13076	08224

Full-trip Polyurethane Cutting Edge Kit
Today's pros are faced with many requirements and stipulations from their customers. Polyurethane cutting edges provide the rigidity of steel edges, and the noise reduction of rubber edges, all while protecting sensitive surfaces. Our one-inch thick edge is formulated for long life. Meyer moldboards and cutting edges are pre-drilled ready for installation. Cutting edges are sold as complete kits or separately as required.

Plow Size / Type	Complete Kit	Cut Edge Only	Bar Strap Only	Hardware Only
6.0 ft. Steel	08116	09281	13055	08224
6.8 ft. Steel	08277	12708	12707	08224

Meyer Heavy-duty Deflectors
Made of rigid polyethylene, reduces blow-back on the windshield, and accentuates the snow rolling action. The 45 degree angle end-cut helps throw snow more precisely and quicker for a cleaner scrape. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required.

Plow Size / Type	Complete Kit	Deflector Only	Bar Strap Only	Hardware Only
6.0 ft. Steel	12036	12058	12028	08612
6.8 ft. Steel	13071	13072	12707	08612

Meyer Rubber Snow Deflectors New!
Made of pliable rubber, keeps snow flume down and away from the windshield and accentuates the snow rolling action. Meyer moldboards are pre-drilled and ready for deflector installation. Deflector complete kits come ready-to-install with hardware bag and steel mounting belt. Components also sold separately as required.

Plow Size / Type	Complete Kit	Deflector Only	Bar Strap Only	Hardware Only
5.0 ft. Steel	08238	13087	13088	08612
6.0 ft. Steel	08103	13046	12028	08612
6.8 ft. Steel	08107	13048	12707	08612

Power Angling Controller with Hands-Free Plowing (HFP)
To reduce effort and increase performance and safety, Meyer has made basic operation of the plow automatic! When activated HFP uses the vehicles direction to control the up/down movement of the blade.  To activate the back-drag mode, press the HFP button once and the moldboard lowers when you put the vehicle in reverse and raises when you put it in drive.  Press the HFP button a second time to engage the forward plowing mode, and the moldboard lowers when you place the vehicle in drive and raises when put in reverse.  It features one-button functionality and illuminated buttons. Unit comes with instructions and adapter for an easy do-it-yourself install.

Pistol Grip	Leg Strap
22830	22265C

Self-Angling Controller with Float
Meyer's self-angling controller raises and lowers the Drive Pro moldboard.  It features one-button functionaltiy and illuminated buttons.  The Drive Pro's self-angling ram automatically moves the moldboard to the right or left.  It senses the weight of the snow and automatically angles to push snow off to either the right or left.  Or if you prefer you can lock the plow in the direction you want.  Unit comes with instructions and adapter for an easy do-it-yourself install.

Pistol Grip	Leg Strap
22846	22265C

Pistol Grip Cradle Mount
The pistol Grip Cradle mount is custom designed for any Meyer Pistol Grip Controller.  The unique design allows the Pistol Grip to snap into place docking the unit in a safe and useful position.  It will mount to the dashboard or with the Floor Mount (sold separately) with convenient mounting screws that come with the Pistol Grip Cradle Mount.  Installation is quick and easy.  Unit comes with mounting hardware for an easy do-it-yourself install.
 

Pistol Grip Cradle Mount

22798

45-Degree Cradle Adapter

The 45-Degree Cradle Adapter provides added flexibility and functionality to your mounting placement.  The 45-degree angle adapter positions your controller in a more convenient location depending on the mount location you desire.  This angle adapter works with both the Pistol Grip and Joystick Cradle Mounts.  The unit mounts to the dashboard with heavy-duty grip tape or screws.  Installation is quick and easy.  Unit comes with mounting hardware and tape for an easy do-it-yourself install.
 

45-Degree Cradle Adapter

22815

Floor Mount 
The Meyer articulating Floor Mount provides maximum ergonomic flexibility to mount the controller close to the operator.  The 10" or 20" flex-articulating arm moves virtually wherever the operator desires.  Works perfectly with all three models:  Joystick, Touch Pad and Pistol Grip.  The unit mounts conveniently to the floorboard.  Unit comes with mounting hardware for an easy do-it-yourself install.
 

Floor Mount

22801 (10")

22844 (20")

Use state-of-the art design to maximize visibility and safety.

Features include:

• Four head lamp system for superior forward and a wide curbside beam pattern for safer, easier & more productive plowing
• Complex reflector headlight system- allows more light energy from the headlight bulb to be used to light the road
• Large access rear door-makes bulb replacement easy
• High output harness system-ensures that maximum electrical energy is transmitted to the headlight system
• Single bolt adjustable mounting-allows faster installation and adjusting when necessary. Lights ship as a left & right set, including all hardware and instructions for a quick installation:

Lights Only

07549 (plug & play installation)

Lights & Modules

07550 (new installation)

2" Receiver Mount Lock
Prevent your valuable Drive Pro from theft with our Stainless Steel Quick Link Lock. 3" locking pin replaces existing pin or bolt, works on all 2" Category 3, receiver hitches. Quick disconnect/connect design makes changes fast and easy. Lock comes with a set of keys (2) complete with instructions for quick & easy installation.

2" Receiver Mount Lock

07695C

2" Receiver Hitch 7" Extension
A 2" front receiver hitch may be necessary to mount a Drive Pro plow to a utility vehicle. If the vehicle hitch is too far under the vehicle, it may not allow the Drive Pro plow's lift frame to attach to the hitch, then Meyer's 2" receiver hitch 7" extension will be needed.

2" Receiver Hitch  7" Extension

FHK45793

2" Receiver Hitch 2" Drop
If the vehicle is too high or too low, the drop extension hitch is needed.

2"  Receiver Hitch 2" Drop

FHK45058

2" Receiver Hitch 4" Drop
If the vehicle is too high or too low, the drop extension hitch is needed.

2" Receiver Hitch 4" Drop

FHK45054

Snow Shoes Drive Pro
Meyer Drive Pro Snow Shoes are designed to set the scrapping height of the cutting edge. It is common for the edge to run ½"-1" higher than the surface when plowing gravel driveways/lots or other ground sensitive surfaces. The Drive Pro shoe is heavy duty steel-formed for maximum longevity and durability. The mushroom design will rotate 360 degrees eliminating hang-ups or catching of unwanted objects. In addition, the mushroom design is convenient for back-dragging applications. Fits all Drive Pro moldboards. Shoes come per each (1) and include all mounting hardware for easy installation.

Shoe Only

09127

6' Power Cord Battery Extension
The power cord battery extension is designed to extend the battery power cord by 6'. The kit comes complete with the hardware to connect and extend the positive and negative wires to reach Utility Vehicle batteries that are mounted under the driver seat or in the rear of the vehicle.

6' Power Cord Battery Extension

22863

Plow Markers
Meyer's heavy duty plow markers allow the operator to see the edge of his plow from the cab providing maximum visibility for increased performance and safety. They are made from solid tubing and are flexible, but durable to withstand the winter environment. Markers are pre-drilled to fit the moldboard, no drilling is necessary. Markers are shipped two (2) per set and include all mounting hardware and instructions for easy do-it-yourself installation.

Plow Markers

09917

Meyer Receiver Hitch Cover
This all-steel, powder painted hitch cover is a perfect companion to your receiver hitch. Hitch covers keep unwanted debris and elements from corroding the hitch, thus extending the life. The Meyer cover fits in a standard 2"x2" receiver hitch and is easily removable with a convenient locking pin. Unit ships per each.

Hitch Cover

03569

The Big Yellow Box
The Meyer Big Yellow Box is the perfect companion for your fall, spring, summer and winter needs. The unit features 8 cubic feet of storage and is made of double walled polymer that is virtually indestructible. Perfect for storing: Sand/Salt, Power Tools, Sports equipment, Pool supplies and tools or garbage. Unit will not rust and comes lock-ready. (Lock is sold separately) Forklift pockets are built-in to move the unit when full of material. Unit is 32"W x 23"D x 30"H. No assembly required.
Learn more

The Big Yellow Box

32403

Meyer Pro Edge Snow Rake
This Meyer accessory is made from a foam-like polyethylene. The squeegee-like head never gets brittle, and doesn't absorb water, so it remains pliable to safely contour to your vehicle and efficiently remove snow. The pliable head also means no more scratching your vehicle's finish. It comes with a long handle so no matter how large your vehicle, the Meyer Pro Edge Snow Rake can reach the area you need to scrape.

Meyer Pro Edge Snow Rake

38197

Hotshot Hand-held Crank Spreader
This professional spreader holds up to 5 lbs. of ice melt products. It's easy to use: set the dial, pull the trigger then rotate the lever in a clockwise position. To stop material output, simply let go of the trigger. Spreads ice-melt, fertilizer or seed for true four-season performance.

Hotshot Hand-held Crank Spreader

38195

Driveway Markers
Meyer Driveway Markers are 4' long, made of sturdy ¼" fiberglass to withstand winter elements. They are flexible, designed to bend virtually in half and return to their original position. Designed of highly reflective florescent orange along with a specialized reflective tape make them highly visible during a storm or after dark.
Learn more

Driveway Markers

03240 Bundle of 100

03242 Insertion Tool

Suspension Enhancement
To improve the ride and overall performance of your vehicle, Meyer offers Timbren Suspension Enhancement kits. Timbren suspension system works in conjunction with your vehicle's factory suspension system to provide added support in the front or rear of your vehicle. Timbren's rubber cushioned products reduce the harsh ride caused by adding leaf springs or helper springs. Timbren suspension kits come complete as a set (2) and include installation instructions. May require professional installation. Learn more

	View Front Axle Video
	View Rear Axle Video

ShurTrax Ballast Solution
To improve the ballast of your plow & truck ShurTrax is the easy, safe way to add up to 400lbs traction weight to trucks and SUV's. Just fill the super-tough, woven mesh reinforced ballast bag with water from your garden hose, and you're ready to go. It's designed to freeze and has been tested to -40 degree F/C. Unit is designed to lie flat in the bed and is tough enough to support 500lbs. of cargo. Ship per each.
Learn more

Shur Trax Model

LW-0048 (Compact/SUV truck)

LW-0056 (Full size pick-up truck)

Meyer Sno-Flo Industrial Paint
Our specially formulated paint is designed to improve snow-rolling action and withstand the harsh operational environment. Meyer Yellow, Black & White Primer is available in aerosol spray cans (12/case) and Meyer Yellow Brush Paint is available in 1 quart cans (4/case) that can be shipped via UPS.

Industrial paint
Brush Yellow:	08755 (4/1qt cans/case)
Spray Case Yellow:	08677 (12 cans/case)
Spray Case Black:	08676 (12 cans/case)
Spray Case White Primer:	08841 (12 cans/case)

Meyer M1 Hydraulic Fluid
Keep your hydraulic unit operation at factory performance by using OEM M1 Hydraulic Fluid. Meyer M1 Hydraulic fluid is scientifically formulated to synchronize with internal components to withstand the extreme temperatures of the summer and winter. Meyer's exclusive additives maximize performance and longevity of the complete operating system. M1 Hydraulic Fluid is guaranteed to perform at temperatures -40 degrees. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall.

Note: using other hydraulic fluids or additives voids your warranty and may permanently damage your unit. Comes in case/box of 12 and includes easy pour spout or by the bottle.

Hydraulic fluid

15487 (case of 12)

15614 (55 gallon drum)

Meyer M2 Hydraulic Flush
Keeping your hydraulic unit internally clean is as important as keeping your engine clean. Meyer's M2 Hydraulic Flush is designed to scrub the internal components and flush away all impurities that may have developed in the system. Our exclusively designed M2 Flush is designed to perform without harming seals, connectors or hydraulic ports. It is recommended that you drain the M1 Hydraulic in the spring, fill and store the unit with Hydra-Flush over the summer & re-fill with new M1 Hydraulic fluid in the fall. Comes in case/box of 12 and includes easy pour spout or by the bottle.

Hydraulic flush

15902 (case of 12)

15903 (5 gallon pail)

15904 (55 gallon drum)

Meyer Dielectric Grease
Prevent your valuable system from the harsh elements of the winter with Meyer's dielectric grease. Meyer's dielectric grease is specially formulated to coat and protect electrical connections from deteriorating elements such as salt and road grime. It is recommended to coat all electrical connections prior to winter and each time you re-connect to ensure optimal performance. Grease comes per each, 2.7oz tube.

Dielectric Grease

15632

Meyer Coolube
Maintain Meyer equipment with our premium quality, multipurpose, non-soap based grease.  Meyer Coolube is specifically formulated to provide better lubrication in harsh conditions, perfect for higher speeds and lower temperatures  It holds up over a wider temperature range (-40 degrees Fahrenheit to 440 degrees Fahrenheit) plus it works wet or dry. Available in 14 oz. tubes or 11 oz. aerosol cans.

Coolube Tube

Tube 15182 (10 tubes/case)

Aerosol 15186 (12 cans/case)

Meyer Chain & Cable Lube
Maintain Meyer equipment with our aerosol Chain & Cable lube.  It is specially formulated to lubricate, preserve and protect chains and cables.  This transparent heavy-duty dry film lubricant is formulated with the latest synthetic additives to ensure maximum penetration and protection against corrosion.  Once applied, the solvent evaporates leaving behind a film that will not attract dust or wash off.  Available in 11 oz. aerosol cans.

Chain & Cable Lube

15184 (12 cans/case)